A toilet seat is an important part of any bathroom, so keeping it in good condition is important. Unfortunately, toilet seats sometimes crack. Here are three of the most common reasons why this happens.
A cracked toilet seat can be both unsightly and dangerous. If the crack is deep enough, it can cause you to cut yourself when you go to sit down.
In addition, cracks in the seat can allow bacteria and other contaminants to get inside, leading to an increased risk of infection.
Thankfully, a few simple methods exist for repairing a cracked toilet seat.
What causes toilet seats to break?
These three are the main reason behind a toilet seat being cracked.
1. Poor-quality materials
2. Incorrect installation
3. Heavy use
Poor-quality materials are often to blame for seats that crack or chip easily.
In contrast, seats that are properly installed and made from high-quality materials should be able to withstand years of heavy use.
Toilet seats can also break if they are used excessively. For example, if someone regularly stands on the seat to reach something high, it will eventually break.
How do you fix a cracked toilet seat?
A cracked toilet seat can be unsightly and dangerous. Fortunately, there are a few easy ways to fix it.
For small cracks, use super glue or epoxy. For bigger cracks, use a plumber’s putty. If your toilet seat is severely damaged beyond repair, you may need to replace it entirely.
Method 1: Use Super Glue or Epoxy
If the crack in your toilet seat is small, you may be able to simply glue it shut. First, cleanse the area around the crack with rubbing alcohol. This will help the glue adhere better.
Next, apply a small amount of super glue or epoxy to the crack and wait for it to dry. Once it’s dry, give it a light sanding with sandpaper to smooth out any rough edges.
Method 2: Use Plumber’s Putty
For bigger cracks, you’ll need to use a plumber’s putty. Start by spreading a generous amount of putty over the crack.
Then, use your finger or a putty knife to smooth it out. Once it’s level with the surface of the seat, use a wet rag to remove any excess putty.
Allow the putty to dry for 24 hours before using the toilet again.
Method 3: Replace the Seat
If your toilet seat is severely cracked or otherwise damaged beyond repair, you may need to replace it entirely. Here are the simple steps about How to replace a broken toilet seat?
To do this, first, remove the old seat by unscrewing the bolts that attach it to the toilet bowl. Be sure to save these bolts, as you’ll need them to attach the new seat.
Next, line up the new seat with the holes in the bowl and screw the bolts (hand-tighten them for now).
Once both bolts are in place, use a wrench to tighten them firmly. And that’s it! Your new toilet seat is now installed.
How to tell if the toilet bowl is cracked?
There are several ways to tell if the toilet bowl is cracked. The first is to look for cracks in the porcelain. These can be either small or large and may or may not be visible to the naked eye.
Simply look at the outside of the bowl for cracks or chips.
Try to check for leaks. If you see water on the floor around the toilet, it’s likely that the bowl is cracked and needs to be replaced.
Try tapping on the side of the bowl with a hammer; if it makes a hollow sound, then there’s a good chance that it’s cracked.
If your toilet bowl is cracked, it must be replaced as soon as possible.
Cracks can cause leaks, leading to water damage and mold growth in your home.
Read More- How do you repair a crack in a toilet tank?
Is it normal for a toilet seat to crack?
There are many reasons why a toilet seat might crack, but it is generally not considered to be normal wear and tear. Cracks can occur due to improper installation, loose bolts, or simply due to age and wear and tear.
Read More- How to remove the screws on a toilet seat?
FAQs
How often do toilet seats break?
It is determined by various factors, including seat type, usage frequency, and material.
However, according to one source, toilet seats have an approximate lifespan of 10 years.
However, this is just a rough estimate, and your toilet seat could last much longer or need to be replaced sooner, depending on the circumstances.
If you take good maintenance of your toilet seat and clean it regularly, it should last many years.
However, if you don’t clean it often or if it’s constantly exposed to moisture, it could start to degrade and need to be replaced sooner.
What causes a porcelain toilet to crack?
A few other things can cause a porcelain toilet to crack.
One of the most common reasons is the toilet is dropped or knocked over. This can cause the porcelain to crack and break.
Another reason is the toilet is not installed properly, and there is too much weight on one side of the toilet. This can cause the porcelain to crack as well.
Another possible cause of breaking porcelain is if it is not cleaned properly, mineral deposits can build up and cause the porcelain to crack.
Can a porcelain toilet crack on its own?
Porcelain toilets are durable and typically don’t crack on their own. However, if the toilet is old or damaged, it may be more susceptible to cracking.
Is there a weight limit on toilets?
The weight limit on toilets can vary depending on the specific model and make of the toilet.
However, it is generally safe to say that most toilets can accommodate people up to around 250 pounds.
Beyond that, it is always best to check with the manufacturer of your particular toilet model to be sure.
How long do soft-close toilet seats last?
Soft-close toilet seats are designed to provide a smooth, quiet closure every time. They are made with high-quality materials and are built to last. Most soft-close toilet seats have a five-year warranty.
