Toilet Clogged and Leaking at Base | Reasons & Solutions

If you’re like me, you probably take your toilet for granted. You flush it, and it takes care of business – no questions asked. But what if your toilet is clogged and leaking at the base? 

A blocked or leaking toilet can be a real pain, not to mention a major hassle. Because A clogged leaking toilet can cause water damage to your floor and cabinets and even lead to mold growth.

As a result, it is vital to treat the problem as quickly as feasible. Luckily, there are some things you can do to try and fix the problem yourself before calling in a professional. 

Today, I’ll explain how to unclog a toilet and repair a leaking foundation. So read on for tips on preventing future clogs. Let’s get started!

What causes a toilet to leak at the base?

Knowing the cause can solve 90% of the issue. So it is important. And match what your route of the problem is.

Cause1. Toilet Clogged and leaking at the base because the Wax seal is worn out.

If you have a plugged and leaking toilet, the wax seal is most likely the culprit. This is a common problem, and it’s easy to fix. 

The wax ring is a ring of soft wax that’s placed between the toilet and the drainpipe. It creates a watertight seal, and it helps keep sewer gases from coming up through the drain.

replace the wax ring to prevent a clogged and leaking toilet

If the wax seal is worn out, it can cause the toilet to leak. The water will flow down the drainpipe and onto the floor. 

You’ll see a wet spot around the toilet base, and you may even hear water running when the toilet is flushed.

To avoid this problem, check the wax seal periodically and replace it if it’s worn out. You can buy a new wax seal at home improvement stores or hardware stores.

Cause2. The toilet won’t flush, and leaks from the base Due to Flange is not installed properly.

When a toilet leaks from the base, it is often due to the flange not being installed properly. The flange sits on top of the drain pipe and is what the toilet bolts to. If it is not installed correctly, it can cause the toilet to leak.

There are a few things you can do to fix this problem. The first is to make sure the flange is installed properly. 

The second is to make sure the toilet is bolted down tight. If neither of these solutions works, you may need to replace the flange.

Cause 3. When I flush, the toilet water comes out of the bottom Because of Clogged Main Drainage.

One common problem that can occur in a home’s plumbing is clogged the main drainage. 

· This can be caused by many factors, including grease build-up, hair accumulation, or foreign objects that have been flushed down the toilet. 

When the main drainage becomes clogged, the water can back up and cause flooding in the home. 

In rare circumstances, the clog may be found deep within the drainage system, necessitating the assistance of a professional plumber to clear it.

In other cases, the clog may be located in a sink or floor drain and can be cleared using a plunger or a plumbing snake. 

If you are experiencing clogged the main drainage, be sure to take action as soon as possible to evade further damage to your home’s plumbing.

Cause4. Toilet Clogged and Leaking at the base because the sealant is broken.

If your toilet is clogged and leaking at the base, it may be because the sealant is broken and the toilet flange isn’t installed level. In this case, you’ll need to repair the sealant and install a new toilet flange to fix the problem.

First, use a plunger to clear the clog. If that doesn’t work, you’ll need to remove the toilet to fix the sealant.

There could be a crack in the porcelain if the leak is coming from the base. If this is the issue, you will require to replace the toilet.

If the leak is coming from the bolts that hold the toilet flange to the floor, you may be able to settle the problem by tightening the bolts. 

If that doesn’t work, you’ll need to replace the toilet flange.

Read More- How to fix a toilet lose from bolts.

How to Fix a toilet clogged and leaking at base

Fixing a leaking with a blocked toilet is quite challenging, but doing the following step may solve the problem.

1. You may apply sealant again

Sealing is an important aspect of toilet care. It helps to keep the bowl clean and prevents water from seeping out and damaging the floor. 

Applying sealant is a simple process that only takes a few minutes. Here’s how to do it:

1. Turn off the toilet’s water supply.

2. Flush the toilet and wait until it’s completely empty.

3. Apply sealant around the edge of the bowl, making sure to get into all the nooks and crannies.

4. Let the sealant dry for 24 hours.

5. Turn on the water supply and flush the toilet to test it.

2. Replace the wax ring to prevent the leaking

It’s relatively simple to replace a wax ring in a toilet. – you just have to be careful not to get the new one dirty. Here’s how to do it:

1. Flush the toilet and hold down the handle to clear out as much water as possible.

2. Unscrew the bolts that hold the toilet to the floor.

3. Lift the toilet off of the flange and set it aside.

4. Remove and discard the old wax ring from the flange.

5. Put the new wax ring on the flange and press it into place.

6. Replace the toilet on the flange and tighten the bolts.

7. Flush the toilet to make sure it’s working correctly.

If your toilet is leaking, it may be because the wax ring is damaged or worn out. In that case, you’ll need to replace it. 

3. Unclog the toilet drainage

There are a few methods that you can use to unclog a toilet drain. The easiest and most common way is to use a plunger. 

You can also use a snake to try to clear the clog. If those methods don’t work, you can try the best ways to unblock a badly blocked toilet.

Can a toilet leak around the base?

Yes, a toilet can leak around the base. A toilet can leak for various reasons, but most commonly because the wax ring that creates the seal between the toilet and the floor is worn out or broken. 

If your toilet is leaking, you should call a plumber to come and fix it. Leaking toilets can cause extensive damage to your floor, so it’s essential to address it as soon as possible.

Is it necessary to seal around the base of a toilet?

In general, it is a good idea to seal around the base of your toilet. This will help to keep moisture and water from seeping into the floor, which can cause damage over time. 

However, if you have a newer toilet that already has a watertight seal, you may not need to do this. If you’re confused about whether or not to seal your toilet, see an expert.

One thing to keep in mind if you choose to seal around the base of your toilet is that you will need to remove the seal every time you clean the toilet. Check Best Sealant from Amazon.

· This can be time-consuming, but protecting your floor is well worth it.

What to do if your toilet is leaking at the base?

If your toilet is leaking at the base, you will need to determine the source of the leak. Once you’ve specified the source, you can take steps to fix it. 

Here are some things you can do:

1. If the leak is coming from the bolts that hold the toilet to the floor, you can tighten the bolts.

2. If the leak is coming from the wax seal, you can replace the wax seal.

3. If the leak is coming from the gasket, you can replace the gasket.

4. If the leak is coming from the flange, you can replace the flange.

Read Out- If your toilet is frequently clogged and misbehaving, then check our best market-dominating no-clog toilet list.

Bottom line Clogged and Leak toilet at Base.

Now that you understand the causes of a clogged toilet, it’s time to take action. If your toilet is leaking at the base, use these tips to solve the problem and get your toilet clog-free and leak-free weekend! 

Be patient and take your time – fixing a clogged or leaking toilet can seem daunting, but it’s definitely doable with a little know-how. 

Have you had any success fixing your own clogged or leaky toilet? Share your tips in the comments below!

Leave a Comment