Unclogging the toilet with baking soda is an excellent idea because it is natural yet effective. 

Baking powder and water used together in an emergency stop pour way or septic system failure are also effective at releasing stubborn clogs caused by hairball buildup that have been prevented from happening before they could occur because of regular maintenance routines such as flushing twice daily (once morning wake up time).

But there is some high point while using baking soda to unblock the toilet. I discuss, so keep reading.

Can you unclog a toilet with baking soda?

It’s possible to unclog a toilet with baking soda, but it can be difficult. You’ll need to pour a good amount of baking soda into the clogged area and let it sit for a while. 

The most important and positive about baking soda is – Is does not harm either porcelain or ceramic, or the septic tank is also eco-friendly.

Then, pour a pot of boiling water down the drain. If this fails, you may require to use a plunger. If this still doesn’t work, it’s time to call a plumber.

unclog toilet with baking soda

How to unclog a toilet with baking soda

Step 1 – Take Action Before you begin, fill a bucket with hot water and set it close by. If you don’t have a bucket of any kind handy, you can also use a pail or even a sturdy cup.

Step 2 – Pour It In The first thing you’ll need to do is pull the toilet lid off and put it somewhere where it won’t get damaged. Now, pour about 1/2 to 3/4 of a gallon of baking soda down into the clogged area.

Step 3 – Wait and Stir. If you’ve done this correctly, some baking soda will be sucked down into the clog. The rest of it will sit at the bottom of the bowl. 

This can take anywhere from 15 minutes to an hour. When the waiting time is up, pour a pot of boiling water directly over the area where the baking soda is sitting. 

Most of it will go down into the clog, but some may splash out the toilet bowl. If this occurs, be sure to clean it up so you don’t slip and fall later on!

Step 4 – Flush When you’re done with your pot of boiling water, flush the toilet a few times to check if the clog has been cleared. If it’s still not working, you may need to repeat the process.

Unclog toilet with baking soda and salt 

Many people use baking soda to unclog toilets, but the cleaning product works even better if you mix it with salt. 

Salt is known for its abrasiveness and ability to dissolve other materials. Combining these two products allows you to easily remove the clog and clear the toilet.

Process- Baking soda and salt are both effective at unclogging toilets. Add a cup of baking soda to the toilet and let it sit for 30 minutes. Then, add a cup of salt and flush the toilet. This should clear up the clog. 

The baking soda reacts with the salt, which creates a more potent cleaning agent. This causes it to work easily and quickly on most blockages in your home. 

One cup of both baking soda and salt should be added to the toilet bowl, followed by water for flushing. Doing this should cause the clog to quickly dissolve, making the toilet bowl usable again.

You must rinse out the toilet bowl after using this method. You can use a wet rag or paper towels for this purpose. 

This will ensure that no baking soda particles are present in the toilet’s water. This could irritate your skin if you use the bathroom after cleaning it with this method.

Baking soda and salt mixture can also be used to clean the inside of a toilet bowl if its surface becomes stained or dirty.

· You should not use other chemicals while using this technique because they could result in adverse side effects for you and your family members. 

·   The only downside to this method is that it does not work on very large blockages. 

· If this is the issue, you will require to hire a professional plumber, who can use different tools to clear out the toilet.

Unclog toilet with baking soda and vinegar 

If the clog doesn’t clear with the boiling water and baking soda, you can try using vinegar. Pour 1/2 a cup of vinegar into the toilet bowl and let it sit for about 15 minutes. 

Then, use a plunger to try to clear the clog. If this still doesn’t work, it’s time to call a plumber.

Natural remedies can help you avoid spending extra money on emergency plumbing bills. 

However, these methods are not foolproof, and there’s always the risk of damaging your toilet if they don’t work. This is why many people prefer to call a plumber to deal with more serious clogs instead of trying natural remedies. 

However, if you only experience simple clogs, these remedies can be a great way to save yourself some money.

Read More- How to unclog a toilet when nothing works.

How does baking soda unclog the toilet?

There are two ways baking soda can be used to unclog a toilet: by pouring it in or using boiling water and plunging. In both cases, the baking soda will help break up the clog and allow the water to flow through more easily.

How to unclog a toilet without baking soda

It can be a real pain when your toilet gets clogged but don’t worry, there are ways to unclog it without calling a plumber. 

If baking soda doesn’t work, you can try using a snake or use a plunger. The plunger creates suction and pushes the clog down the drain. 

You might also use a wire hanger or a coat hanger. Uncoil the hanger and insert it into the drain. Twist it back and forth until the clog is dislodged. 

How to unclog a toilet with dish soap 

If your toilet is clogged, you might try pouring dish soap down the drain to unclog it. The dish soap will assist in breaking up the clog.

It is essential to only use the dish soap if the plumbing can handle it.

Process:

1. Pour 2 cups of dish wash liquid directly into the toilet bowl and leave it for minutes.

2. After the following minutes, pour hot water slowly to not immediately flush away.

3. Set the mixture for about 30 minutes and again pour hot water, then flush. 

4. You can use a plunger after this ( optional) if you want. That works very much.

Dish wash liquid and hot can break down any grease, oil, hair, baby wipes type clogging culprit.

How to unclog a toilet with salt 

Pour a pot of boiling water into the toilet bowl. Immediately add 1/2 cup of salt to the water. Allow the salt to dissolve for a minute. Flush the toilet. Or check how Epsom salt unblocks the clog.

Q1. How long do you leave the vinegar and baking soda in a clogged toilet?

For a totally stopped up toilet, you’ll want to leave the mixture in there for at least 8 hours. If it’s just a little slow, you may only need to leave it for a few hours or even just overnight.

Q2. Can poop clog a toilet?

Yes, poop can clog a toilet. If too much poop in the toilet, it can block the sewer line and cause a clog. This is more familiar than you might think. Know to dissolve hard poop in clog toilet.

Wrap Up on Baking Soda For Clogged Toilet

Baking soda is a versatile commodity that can be used for a variety of applications. We’ve shown you how to use it to unclog a toilet in this blog post. We hope you find this material useful and that you will put it to use!

We’ve also compiled a list of other ways to use baking soda around the home, so be sure to check out our previous blog post- Baking soda in the toilet before going on vacation and see the magical result.

READ MORE- Will a toilet eventually unclog itself?