Seating a new toilet may appear to be a difficult job. Still, with the correct equipment and instructions, it can be completed in a matter of hours.
This guide will step you through the processes required to install a new toilet and provide some useful hints to make the process go more smoothly.
So whether you’re replacing an old toilet or installing one for the first time, read on for all the info you need!
How long does it take to install a toilet?
It takes an average of 6 hours to install a toilet. The installation requires digging up the old soil, breaking through concrete (if any), putting in a new wax ring under the toilet base, attaching it to the floor, connecting piping, and finally mounting the seat.
Whether the installation of a toilet requires fixing or not, this can be done in about 15 minutes. But, if you have to replace an old toilet, this will take some time.
A new toilet model can be installed in less than 30 minutes while replacing an old model can take at least 1-2 hours.
Here are the necessary steps that should be followed during installation:
Remove the old toilet
Fix the new toilet in place with bolts or screws. Try to tighten the bolts enough so that the parts stay in the proper position, but not too much as to crack them.
Connect all necessary lines for flushing and fill with water before you turn it on. This will help pressurize the system and check if everything is in order.
Attach water and waste lines. For installing a new toilet, galvanized and plastic pipes can be used. They should then be connected with brass or plastic compression fittings to ensure good quality connections over time.
For installing an old model, you may need to use flexible rubber hoses for the water and waste lines. These hoses are easy to install, but they degrade quickly, so it is better to replace them with new ones.
Your toilet installation would be complete only after attaching the toilet tank along with its flushing mechanism properly in place on top of the bowl.
With this, your task is done.
Don’t forget to check some important things to know before buying a new toilet.
Is installing a toilet easy?
There is no one-size-fits-all answer to this inquiry, as the ease of installing a toilet depends on different factors, such as the type of toilet you are installing and the existing plumbing in your home.
With that said, most toilets can be installed relatively easily with the help of a few essential tools and a little bit of know-how.
If you are buying a new toilet, the box should include an instruction manual to help guide you through the installation process.
If not, search online for instructions specific to your make and model of toilet. Manufacturers generally provide detailed instructions on either paper or disc.
Remember that manufacturers’ instructions take priority over any other types of written documentation, including
Read more- Why 90% of toilets are white?
How long does it take for a new toilet to set?
Generally, the standard time for a new toilet to cure is about two days. However, in certain circumstances, this process may need to be extended.
For example, if the porcelain is laid in cold weather with low humidity, more time will be needed.
Read more-The right time you should use the toilet after installation.
What is the labor cost to install a toilet?
The labor cost to install a toilet can vary depending on the type, brand, location, and contractor. In general, the labor cost to install a toilet ranges from $75 to $150 per hour.
*NOTE: This is only an average. Actual prices may vary by region and project size. Please consult with your contractor for accurate pricing.*
Can you use a toilet immediately after installation?
Yes, you can use a toilet immediately after installation. However, you should wait at least 24 hours before using the toilet to allow the sealant to set.
The general rule of a minimum of 24 hours is up to a maximum of 2 days.
Is installing a new toilet hard?
Not installing a new toilet is not hard as you think, but there are some points you should remember like right height, flange, rough-in size, supply line, water supply valve size and etc.
Wrap Up on Install A New Toilet
The toilet was installed with no issues. Yet, there are a few rules that must be followed when using it:
1) Never put anything other than human waste into the toilet; 2) When you flush, make sure the lever is all of the ways down so that water flows out and not up;
3) No sitting on top of or near any part of the flushing system; 4) If your child needs help going potty, please use caution as these steps may not work for them.
 We want everyone who uses this new toilet to have a fantastic experience!
Do you know why toilets are made of Porcelain? -Here is the answer.